Development of a Photon Counting Detector for CT Breast Imaging

Univ Of Massachusetts Med Sch Worcester, Worcester MA

Investigators

Linked publications & trials

Abstract

DESCRIPTION (provided by applicant): In an effort to improve the early stage detection and diagnosis of breast cancer, a handful of research groups have been investigating the use of x-ray computerized tomographic (CT) imagers dedicated for use in imaging the breast. Preliminary results suggest that dedicated breast CT systems can provide improved visualization of 3D breast tissue as compared to conventional mammography. However, current breast CT prototypes that are being investigated have limitations in terms of detectors used, acquisition geometry and signal processing that result in less than desirable spatial resolution, lesion contrast, and signal-to-noise (SNR) ratio. These CT prototypes also measure a substantial amount of scattered radiation, and have inadequate detector coverage for breast tissue located near the chest wall. These physical limitations will prohibit current breast CT technology from providing the maximum performance in detecting and diagnosing early-stage breast cancer. The overall goal of this proposal is to develop and validate an innovative detector system and imaging methodology for improved performance in dedicated CT imaging of the breast. The CT breast imaging system that we propose herein will use semiconductor detectors operating in a photon counting mode, acquiring projections in a helical CT geometry. For over a century now, clinical x-ray imaging devices have operated in energy integrating mode, whereby images are formed by integrating x-ray events over a finite acquisition time. For a number of reasons which we outline in the proposal, the performance of energy integrating detectors are sub-optimal for use in CT imaging of the breast. However, due to the high count rate (i.e., x-ray fluence incident on the detector) typically present in x-ray CT, it has historically been impossible to operate CT detectors in a photon counting mode. Due to recent technological improvements in x-ray detectors and associated electronics, it has now become feasible for photon counting detectors to be used for breast CT applications. Simulation and modeling will be used to examine certain design specifications for such a photon- counting x-ray CT system, and a prototype will be constructed and validated by imaging breast phantoms and fresh mastectomy specimens. Using a bench-top prototype of the proposed CT imager, we will validate its performance and compare it to a conventional flat-panel CT breast imager using an indirect conversion, energy integrating detector. PUBLIC HEALTH RELEVANCE: Tomographic x-ray imaging dedicated to imaging of the breast can potentially improve the detection and diagnosis of breast cancer by providing radiologists with 3D images of the breast. This research proposes to develop an improved, innovative detector system for breast CT imaging.